Tenda 16 Port Network Switch 16 POE RJ45 GIGABIT for Internet or CCTV

EG1116P-16-150W is a Tenda PoE switch that offers 16 10/100/1000 Mbps Base-TX RJ45 ports. Ports 1-16 comply with the IEEE 802.3af standard (maximum PoE power output: 1...

EG1116P-16-150W is a Tenda PoE switch that offers 16 10/100/1000 Mbps Base-TX RJ45 ports. Ports 1-16 comply with the IEEE 802.3af standard (maximum PoE power output: 15.4 W) and 802.3at standard (maximum PoE power output: 30 W). The switch offers a maximum PoE power output of 135W and can supply power to and exchange data with APs IP cameras and IP phones through CAT5/Cat6 cables. It also provides simple management modes such as CCTV VLAN and Isolation to help reduce cabling costs of IP terminals like APs and IP cameras.

6KV Lightning Protection PoE Switch is the only engineering switch
In real projectsAPs and cameras are often installed outdoors or at an elevated location which increases the chance of lightning strikes on cameras and PoE-powered switches. The result is that individual devices are damaged when the outcome is light and even the whole local area network is damaged.Tenda TEG11 series switches have professional lightning protection design - 6KV Lightning Protection for Ports and the powerand they have two levels of protection design respectively which effectively suppress the lightning current from the network cable and power supply equivalent to adding a security wall to the entire network monitoring system. The test standard is much higher than the national CCCrequest. In the thunderstorm Tenda TEG11 series switches can also provide a stable and reliable service to the surveillance network and guarantee the normal transmission of the picture.

CCTV Standard VLAN and Isolation Operation Modes Offered
CCTV: in this mode the port cache is optimized and PoE ports 1-8 have higher priorities over the other ports. All the ports of the switch can communicate with each other.If multiple IP cameras are connected to the switch you are recommended to enable this mode and connect the uplink port of the switch to the upstream device which the monitoring computer connects.This ensures smoother monitoring video playback.

Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other.

VLAN: ports 1 to 14 of TEG1116P-16-150W are isolated from each other but can communicate with ports 15 and 16 (uplink ports) respectively.Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing.

Isolation: ports 1 to 8 and Ports 9 to 16 of TEG1116P-16-150W belong to two different VLAN.This mode can be used to isolate supervision network and wireless network to make them not interfere with each other.

135W PoE power supplysimplified wiring
Ports 1-16 comply with the IEEE802.3af and IEEE802.3at power supply standards. The entire switch offers a maximum PoE power output of 135W whereas each port offers a maximum PoE power output of 30 W. The ports can be used to supply power to and exchange data with APs and IP cameras

Standard&Protocol
IEEE 802.3/IEEE 802.3u/IEEE 802.3ab/IEEE 802.3x/IEEE 802.3af/IEEE 802.3at

Store & ForwardYes
exchange capacity 32 Gbps
Packet Forwarding Rate23.6Mpps
RAM Data Buffer 4Mb
MAC Address Table 4K
PoE supply management Port 1-16 support IEEE802.3at/af PoE standard
PoE through pin: 1 2 4 5 + 3 6 7 8 -
Power Consumption
in full conguration:<150W
PoE Max Power Supply:135W
Dimension: 294*178*44mm ( W x D x H )
Type POE
Country of Origin China
RoHS Compliant Yes
SVHC TBA
Parent #TENDA-POE
Ends RJ45
Ports 16 port
Type:POE;Country of Origin:China;RoHS Compliant:Yes;SVHC:TBA;Parent:#TENDA-POE;Ends:RJ45;Ports:16 port;