This Power supply requires a mains figure of 8 cable which is not supplied See quicksearch: 00155

The PI315 AC adapter is perfect for devices requiring no more than a 12 Volt power supply that use a 2.1mm inner pin x 5.5mm outer diameter. rated at 1.25 Amps pleas ensure that your device does not exceed this. Most commonly 2.1mm x 5.5mm adapters are used for CCTV equipment or other low powered equipment such as solar panel equipment (water fountains low power LED lights etc)

Please ensure the DC tip is the correct size for your device before you purchase with your manufacturer as there are lost of various sizes available

Technical Data
Input Voltage 90-264V ac 47-63Hz Load Regulation +/- 5% EMI FCC Class B conduction & radiation Efficiency 75% typical MeanTime Between Failures 50000 hours at 25 degreeC full load Safety Cul UL PSE TUV GS CCC DOIR

C-Tick CE BSMI approved Output Connector: 2.1mm x 5.5mm x 12mm Output Power Max: 14.4W Power Supply Output Type: Fixed External Width: 49.8mm External Depth: 26.3mm Approval Bodies: BSMI CCC CE C-Tick cUL DOIR GS PSE TUV UL Frequency Max: 63Hz Frequency Min: 47Hz Height: 68.2mm No. of Outputs: 1 Output Current: 1.2A Output Voltage: 12V Power Rating: 18W Power Supply Type: Desktop External Supply Voltage AC Max: 264V Supply Voltage AC Min: 90V

Please check with the manufacturer of your equipment if you are unsure of the DC jack size required.

This Power supply requires a mains figure of 8 cable which is not supplied See quicksearch: 00155