To allow 4 pieces of equipment to be powered via one mains input. Simply connect a standard IEC C13 (kettle lead) power lead into the board and then use any of the C14 outlets to connect to your device.
Fitted with an overload switch so should you accidentally exceed the 10 amp load capacity the board will trip to protect the connected devices.
This device can be mounted to most surfaces using using 3mm or no. 4 screws (not supplied) and has an blue LED power indicator.
Please note Max load is 10 Amps at 250 Volts
1 x C13 kettle lead input 4 x C14 Power Outlets Blue LED Indicator Dimensions: 17cm (Length) x 4cm (Width) x 3cm (Depth) Please note total width with switch is 5cm
